Simulation Methods in Physics II SS 2018
| Possible exam dates:
Tuesday 24.07.2018 between 10am-2pm,
- 1 Overview
- 2 Lecture
- 3 Tutorials
- 3.1 Location and Time
- 3.2 Worksheets
- 3.3 General Remarks
- 3.4 Hand-in-exercises
- 3.5 What happens in a tutorial
- Lecture (2 SWS) and Tutorials "Simulationsmethoden in der Praxis" (2 SWS)
- JP Dr. Maria Fyta
- Course language
- Location and Time
- Lecture: Thu, 11:30 - 13:00; ICP, Allmandring 3, Seminar Room (room 01.079)
- Tutorials: Thu, 14:00-15:30 (Tutors: Dr. Miriam Kohagen, Dr. David Sean; ICP, Allmandring 3, CIP-Pool (room 01.033)
The tutorials have their own title "Simulationsmethoden in der Praxis", as they can be attended independently of the lecture and are in fact part part of the Physics MSc module "Fortgeschrittene Simulationsmethoden" and not of the module containing the lecture "Simulation Methods in Physics II".
These hands-on-tutorials will take place in the CIP-Pool of the ICP, Allmandring 3. They consist of practical exercises at the computer, like small programming tasks, simulations, visualization and data analysis. The tutorials build on each other, therefore continuous attendance is expected.
The course intends to give an overview about modern simulation methods used in physics today. The stress of the lecture will be to introduce different approaches to simulate a problem, hence we will not go too to deep into specific details but rather try to cover a broad range of methods. For an idea about the content look at the lecture schedule.
We expect the participants to have basic knowledge in classical and statistical mechanics, thermodynamics, electrodynamics, and partial differential equations, as well as knowledge of a programming language. The knowledge of the previous course Simulation Methods I is expected.
- 1. Obtaining 50% of the possible marks in the hand-in exercises.
The final grade will be determined from the final oral examination.
Useful online resources
- Roethlisberger, Tavernelli, EPFL, Lausanne, 2015: 
- E-Book: Kieron Burke et al.,University of California, 2007: E-Book: The ABC of DFT.
- Linux cheat sheet here (53 KB).
- A good and freely available book about using Linux: Introduction to Linux by M. Garrels
- Density-functional-theory tight-binding (DFTB): Phil. Trans. R. Soc. A, 372(2011), 20120483. , Computational Materials Science 47 (2009) 237–253 
- "Ab Initio Molecular Dynamics: Theory and Implementation" in Modern Methods and Algorithms, NIC Series Vol 1. (2000) 
- University Intranet: Quantentheorie der Molekuele (DE), Springer Spektrum 2015, 
- Be careful when using Wikipedia as a resource. It may contain a lot of useful information, but also a lot of nonsense, because anyone can write it.
|12.04.2018||Introduction/organisation, electronic structure||Slides (2.62 MB), Lecture Notes (2.65 MB)|
|19.04.2018||Hartree and Hartree-Fock (HF) approximations, post HF||Lecture Notes (2.78 MB)|
|26.04.2018||Density Functional Theory (DFT)||Lecture Notes (1) (5.64 MB), Lecture Notes (2) (3.76 MB)|
|03.05.2018||ab initio MD, QM/MM||Lecture Notes (3.76 MB)|
|10.05.2018||Holiday (Christi Himmelfahrt)||---|
|17.05.2018||Classical force fields and water models||Slides (3.1 MB), Lecture Notes (3.93 MB)|
|07.06.2018||Simulations of macromolecules and soft matter||Lecture Notes (2.81 MB)|
|14.06.2018||Poisson-Boltzmann theory, charged polymers||Poisson-Boltzmann (2.19 MB) Polymer scaling (975 KB)|
|21.06.2018||Hydrodynamic methods I (Brownian and Langevin Dynamics)||Lecture Notes (4.1 MB)|
|28.06.2018||Hydrodynamic methods II (DPD, Lattice-Boltzmann) (contd.)||Lecture Notes (5.69 MB)|
|05.07.2018||Lattice-Boltzmann (contd.)||Lecture Notes (LBM) (2.29 MB)|
|12.07.2018||Free energy methods||Lecture Notes (5.55 MB), -->|
|19.07.2018||Coarse-graining, multiscale simulations|
Location and Time
- The tutorials take place in the CIP-Pool on the first floor of the ICP (Room 01.033, Allmandring 3), Thu, 15:45 – 17:15 (Tutors: Miriam Kohagen / David Sean )
There will be in total 6 worksheets, which will be handed out every two weeks on Wednesdays at 14:00. The deadline for the solutions will be two weeks after on Wednesdays before 13:00. The first worksheet will be uploaded on Wed. April 18th. The deadline will be Wed. May 2nd.
Worksheet 5: Charge distribution around a charged rod
- Deadline: July 4, 2017, 12:00 noon by email to David Sean use SM2_05 as subject line.
- the Worksheet (346 KB)
- NEW Worksheet (339 KB)
- template (7 KB) - ESPResSo sample script
- ESPResSo install (417 bytes)
Worksheet 6: Flow Between Plates and Free Energy
- Deadline: July 18, 2017, 12:00 noon by email to David Sean use SM2_06 as subject line.
- Worksheet (282 KB)
- template (2 KB) - ESPResSo sample script
- ESPResSo install (423 bytes)
- latex-template.tex (7 KB) - LaTeX template for the report
Worksheet 6: Density functional theory and ab initio molecular dynamics
- Deadline: July 17, 2017, 12:00 noon by email to Frank Uhlig use SM2_06 as subject line.
- Worksheet 6 (272 KB)
- template (433 KB) - CP2K input files
- latex-template.tex (7 KB) - LaTeX template for the report
- For the tutorials, you will get a personal account for the ICP machines.
- All material required for the tutorials can also be found on the ICP computers in the directory
- For the reports, we have a nice LaTeX template (7 KB).
- You can do the exercises in the CIP-Pool when it is not occupied by another course. The pool is accessible on all days, except weekends and late evenings.
- If you do the exercises in the CIP-Pool, all required software and tools are available.
- The worksheets are to be solved in groups of two or three people. We will not accept hand-in-exercises that only have a single name on it.
- A written report (between 5 and 10 pages) has to be handed in for each worksheet. We recommend using LaTeX to prepare the report.
- You have two weeks to prepare the report for each worksheet.
- The report has to be sent to your tutor via email (Miriam Kohagen or David Sean).
- Each task within the tutorial is assigned a given number of points. Each student should have 50 % of the points from each tutorial as a prerequisite for the oral examination.
What happens in a tutorial
- The tutorials take place every week.
- You will receive the new worksheet on the days before the tutorial.
- In the first tutorial after you received a worksheet, the solutions of the previous worksheet will be presented (see below) and the new worksheet will be discussed.
- In the second tutorial after you received the worksheet, there is time to work on the exercises and to ask questions for the tutor.
- You will have to hand in the reports on Monday after the second tutorial.
- In the third tutorial after you received the worksheet, the solutions will be discussed:
- The tutor will ask a team to present their solution.
- The tutor will choose one of the members of the team to present each task.
- This means that each team member should be able to present any task.
- At the end of the term, everybody should have presented at least once.